View ULN200XD1_1331290.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ULN200XA/XD1
Seven darlington array
Features

Seven darlingtons per package Output current 500mA per driver (600mA peak) Output voltage 50V Integrated suppression diodes for inductive loads Outputs can be paralleled for higher current TTL/CMOS/PMOS/DTL Compatible inputs Inputs pinned opposite outputs to simplify layout
DIP-16 SO-16 (Narrow)
Description
The ULN2001, ULN2002, ULN2003 and ULN 2004 are high voltage, high current darlington arrays each containing seven open collector darlington pairs with common emitters. Each channel rated at 500mA and can withstand peak currents of 600mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The versions interface to all common logic families:
ULN2001 ULN2002 ULN2003 ULN2004 General Purpose, DTL, TTL, PMOS, CMOS 14-25V PMOS 5V TTL, CMOS 6-15V CMOS, PMOS
These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers. The ULN2001A/2002A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULN2001D1/2002D1/2003D1/ 2004D1.
December 2006
Rev. 5
1/14
www.st.com
14
ULN200XA/XD1
Contents
1 2 3 4 5 6 7 8 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
ULN200XA/XD1
Diagram
1
Figure 1.
Diagram
Schematic diagram
ULN2001 (each driver)
ULN2002 (each driver)
ULN2003 (each driver)
ULN2004 (each driver)
3/14
Pin configuration
ULN200XA/XD1
2
Figure 2.
Pin configuration
Pin connections (top view)
4/14
ULN200XA/XD1
Maximum ratings
3
Table 1.
Maximum ratings
Absolute maximum ratings
Parameter Output voltage Input voltage (for ULN2002A/D - 2003A/D - 2004A/D) Continuous collector current Continuous base current Operating ambient temperature range Storage temperature range Junction temperature Value 50 30 500 25 - 20 to 85 - 55 to 150 150 Unit V V mA mA C C C
Symbol VO VI IC IB TA TSTG TJ
Table 2.
Symbol RthJA
Thermal Data
Parameter Thermal resistance junction-ambient, Max. DIP-16 70 SO-16 120 Unit C/W
5/14
Electrical characteristics
ULN200XA/XD1
4
Table 3.
Symbol
Electrical characteristics
Electrical characteristics (TA = 25C unless otherwise specified).
Parameter Test VCE = 50V, (Figure 3.) TA = 70C, VCE= 50V (Figure 3.) ICEX Output leakage current TA = 70C for ULN2002, VCE= 50V, VI = 6V (Figure 4.) TA = 70C for ULN2002, VCE= 50V, VI = 1V (Figure 4.) IC = 100mA, IB = 250A 0.9 1.1 1.3 0.82 0.93 0.35 1 50 65 13 2.4 2.7 3 5 6 7 8 1000 15 0.5 VI to 0.5VO 0.5 VI to 0.5VO VR = 50V TA = 70C, VR = 50V IF = 350mA 1.7 0.25 0.25 25 1 1 50 A 100 2 V pF s s Min. Typ. Max. 50 100 500 500 1.1 1.3 1.6 1.25 1.35 mA 0.5 1.45 A V A Unit
Collector-emitter saturation VCE(SAT) voltage (Figure 5.)
IC = 200mA, IB= 350A IC = 350mA, IB= 500A for ULN2002, VI = 17V
II(ON)
Input current (Figure 6.)
for ULN2003, VI = 3.85V for ULN2004, VI = 5V VI = 12V
II(OFF)
Input current (Figure 7.)
TA = 70C, IC = 500A VCE= 2V, for ULN2002 IC = 300mA for ULN2003 IC = 200mA IC = 250mA IC = 300mA for ULN2004 IC = 125mA IC = 200mA IC = 275mA IC = 350mA for ULN2001, VCE = 2V, IC = 350mA
VI(ON)
Input voltage (Figure 8.)
V
hFE CI tPLH tPHL IR VF
DC Forward current gain (Figure 5.) Input capacitance Turn-on delay time Turn-off delay time Clamp diode leakage current (Figure 9.) Clamp diode forward voltage (Figure 10.)
6/14
ULN200XA/XD1
Test circuits
5
Figure 3.
Test circuits
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
7/14
Test circuits
ULN200XA/XD1
Figure 9.
Figure 10.
Figure 11. Collector current vs input current
Ic (mA) Tj=25C 500 400 Max 300 200 TYPICAL 100 0
D96IN453
Figure 12. Collector current vs saturation voltage
Ic (mA) 500 Tj=25C 400 Max 300 200 TYPICAL 100 0
D96IN454
0
100
200
300
400
500
Ib(A)
0.0
0.5
1.0
1.5
Vce(sat)
Figure 13. Peak collector current vs duty cycle Figure 14. Peak collector current vs duty cycle
Ic peak (mA) 500 400 300 200 100 0 0 20 40 60 80 DC
765 4 3 2
D96IN451
NUMBER OF ACTIVE OUTPUT
Ic peak (mA) 500 400 300
D96IN452A
Tamb=70C (SO16)
2 3
Tamb=70C (DIP16)
200
7
5
100
NUMBER OF ACTIVE OUTPUT
0 0 20 40 60 80 100 DC
8/14
ULN200XA/XD1
Package mechanical data
6
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
9/14
Package mechanical data
ULN200XA/XD1
Plastic DIP-16 (0.25) MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 TYP. MAX. inch
P001C
10/14
ULN200XA/XD1
Package mechanical data
mm DIM. MIN. A a1 a2 b b1 C c1 D(1) E e e3 F(1) G L M S 3.8 4.60 0.4 9.8 5.8 1.27 8.89 4.0 5.30 1.27 0.62 8 (max.) 0.150 0.181 0.150 0.35 0.19 0.5 45 10 6.2 (typ.) 0.386 0.228 0.1 TYP. MAX. 1.75 0.25 1.6 0.46 0.25 0.014 0.007 0.004 MIN.
inch TYP. MAX. 0.069 0.009 0.063 0.018 0.010 0.020
OUTLINE AND MECHANICAL DATA
0.394 0.244 0.050 0.350 0.157 0.208 0.050 0.024
SO16 (Narrow)
(1) "D" and "F" do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.006inc.)
0016020 D
11/14
Order code
ULN200XA/XD1
7
Table 4.
Order code
Order code
Part numbers ULN2001A ULN2002A ULN2003A ULN2004A ULN2001D1 ULN2002D1 ULN2003D1 ULN2004D1 ULN2001D1013TR ULN2002D1013TR ULN2003D1013TR ULN2004D1013TR Package DIP-16 DIP-16 DIP-16 DIP-16 SO-16 SO-16 SO-16 SO-16 SO-16 in Tape & Reel SO-16 in Tape & Reel SO-16 in Tape & Reel SO-16 in Tape & Reel
12/14
ULN200XA/XD1
Revision history
8
Table 5.
Date
Revision history
Revision history
Revision 5 Changes Order codes has been updated and document has been reformatted.
05-Dec-2006
13/14
ULN200XA/XD1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14

▲Up To Search▲

Price & Availability of ULN200XD1

	To Download ULN200XD1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .